Cambium Networks PTP 820 Series, User Manual, Page: 844 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-25
Table 194 Service Bundle CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number 1-32 for P2P and MP
services.
1-30 for MNG services.
The Service Point ID.
service-
bundle-id Number 1 – 63
Note : In the current
release, only Service
Bundle 1 is supported.
The service bundle assigned to
the service point.
The following command assigns Service Bundle 1 to Service Point 1 in Service 37.
service[37]>sp egress-service-bundle set spid 1 service-bundle-id 1
Attaching a VLAN Bundle to a Service Point (CLI)
For service points with an interface type of bundle-C-tag or bundle-S-tag, you must classify a group of VLANs (VLAN
Bundle) to the service point.
To classify a VLAN Bundle to a bundle-c-tag or bundle s-tag service point, go to service view for the service and
enter the following command:
service[SIP]>sp bundle cvlan attach spid <sp-id> vlan <vlan> to-vlan <to-
vlan>
To remove a VLAN Bundle from a bundle-c-tag or bundle-s-tag service point, go to service view for the service and
enter the following command:
service[SIP]>sp bundle cvlan remove spid <sp-id> vlan <vlan> to-vlan <to-
vlan>
Table 195 VLAN Bundle to Service Point CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number
1-32 for P2P and MP services.
1-30 for MNG services. This ID is unique within the
service.
vlan Number 1-4094 The C-VLAN at the beginning of
the range of the VLAN Bundle.
to-vlan Number 1-4094 The C-VLAN at the end of the
range of the VLAN Bundle.
The following command classifies C-VLANs 100 through 200 to Service Point 1 in Service 37:
service[37]>sp bundle cvlan attach spid 1 vlan 100 to-vlan 200
The following command removes C-VLANs 100 through 200 from Service Point 1 in Service 37:
service[37]>sp bundle cvlan remove spid 1 vlan 100 to-vlan 200