Chapter 15: Configuration Guide (CLI)
Configuring XPIC (CLI)
phn-3965_006v002
Page 15-21
Note
XPIC support is indicated by an X in the script name. For example, mdN_A2828X_111_1205 is an
XPIC-enabled script. mdN_A2828N_130_100 is not an XPIC-enabled script. For a list of XPIC support-
enabled scripts, refer to the most recent PTP 820G Release Notes.
3.
Create an XPIC group that consists of the two radio carriers that will be in the XPIC group. See
Creating an XPIC Group (CLI)
To create an XPIC group:
1
Create the XPIC group by entering the following command in root view:
root> radio xpic create group <group> radio <slot> port <port> radio
<slot> port <port>
2
Enable the group by entering the following command in root view:
root> radio xpic set group <group id> admin enable
The following commands create and enable XPIC group 1 consisting of the two radio carriers of an RFU-D being
used with an PTP 820F:
root> radio xpic create group 1 radio 1 port 1 radio 1 port 2
root> radio xpic set group 1 admin enable
Table 144
XPIC Configuration CLI Parameters
Parameter
Input Type
Permitted Values
Description
Group
Number
1-4
The group ID of the XPIC group.
slot
Number
1
port
Number
1-2
Theradio carrier you want to add to the XPIC
group.
Performing Antenna Alignment for XPIC (CLI)
1.
Align the antennas for the first carrier. While you are aligning these antennas, mute the second carrier. See
2.
Adjust the antenna alignment until you achieve the maximum RSL for the first-
carrier link (the “RSL
wanted
”).
This RSL should be no more than +/-2 dB from the expected level. Record the RSL of the first carrier as the
RSL
wanted
.
3.
Measure the RSL of the second carrier a
nd record it as the “RSL
unwanted
”.
4.
Determine the XPI, using either of the following two methods:
o
To calculate the XPI, subtract the RSL
unwanted
from the RSL
wanted
.
o
Read the XPI from the Modem XPI field of the Radio Parameters page in the Web EMS. See
Summary of Contents for PTP 820 Series
