Cambium Networks PTP 820 Series, User Manual

Page: 454 / 1149

Chapter 7: Quality of Service (QoS) Configuring Scheduling
phn-3965_006v002
Page 7-43
Assigning a Priority Profile to an Interface
To assign a priority profile to an interface:
1. Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 214 ).
2. Select an interface in the Ethernet Logical Port Configuration table and click Scheduler . The Logical
Interfaces – Scheduler page opens, with the Egress Port Scheduling Priority Configuration – Edit page open
by default.
Figure 250 Logical Interfaces – Scheduler – Egress Port Scheduling Priority
3. In the Profile ID field, select from a list of configured scheduling priority profiles. See Configuring Priority
Profiles .
4. Click Apply , then Close .
Assigning a WFQ Profile to an Interface
To assign a WFQ profile to an interface:
1. Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 214 ).
2. Select an interface in the Ethernet Logical Port Configuration table and click Scheduler . The Logical
Interfaces – Scheduler page opens, with the Egress Port Scheduling Priority Configuration – Edit page open
by default ( Figure 250 ).
3. Select Egress Port Scheduling WFQ . The Egress Port Scheduling WFQ Configuration – Edit page opens.
Figure 251 Logical Interfaces – Scheduler – Egress Port Scheduling WFQ