Cambium Networks PTP 820 Series, User Manual, Page: 441 / 1149

Chapter 7: Quality of Service (QoS) Configuring Egress Shaping
phn-3965_006v002
Page 7-30
Editing a Queue Shaper Profile
To edit a queue shaper profile:
1. Select Ethernet > QoS > Shaper > Queue Profiles . The Queue Shaper Profile page opens ( Figure 238 ).
2. Select the profile you want to edit and click Edit . The Queue Shaper Profile – Edit page opens. This page is
similar to the Queue Shaper Profile – Add page ( Figure 239 ). You can edit any parameter except the Profile
ID .
3. Modify the profile.
4. Click Apply , then Close .
Deleting a Queue Shaper Profile
You cannot delete a queue shaper profile that is assigned to a queue. You must first remove the profile from the
queue, then delete the profile. See
Assigning a Queue Shaper Profile to a Queue .
To delete a queue shaper profile, select the profile in the Queue Shaper Profiles Configuration table ( Figure 238 )
and click Delete . The profile is deleted.
To delete multiple queue shaper profiles:
1. Select the profiles in the Queue Shaper Profiles Configuration table or select all the profiles by selecting the
check box in the top row.
2. Click Delete . The profiles are deleted.