Cambium Networks PTP 820 Series, User Manual, Page: 365 / 1149

Chapter 5: Radio Configuration Configuring and Viewing Radio PMs and Statistics
phn-3965_006v002
Page 5-51
Parameter Definition
Integrity Indicates whether the values received at the time and date of the
measured interval are reliable. An x in the column indicates that the
values are not reliable due to a possible power surge or power failure that
occurred at that time.
To set the XPI PM thresholds, click Thresholds . The XPI Thresholds Configuration – Edit Page opens. For each radio,
specify the modem XPI threshold for calculating XPI Exceed Threshold seconds, and click Apply .
Figure 183 XPI Thresholds Configuration – Edit Page
Displaying Traffic PMs
This section includes:
•
Displaying Capacity and Throughput PMs
•
Displaying Utilization PMs
•
Displaying Frame Error Rate PMs
Displaying Capacity and Throughput PMs
You can display PMs for capacity and throughput for a radio, based on:
•
The total Layer 1 bandwidth (payload plus overheads) sent through the radio (Mbps).
•
The total effective Layer 2 traffic sent through the radio.
You can also configure thresholds for capacity and throughput PMs. The number of seconds during which these
thresholds are exceeded are among the displayed PMs.
To display capacity and throughput PMs per radio: