Cambium Networks PTP 820 Series, User Manual

Page: 310 / 1149

Chapter 4: Unit Management Configuring Unit Parameters
phn-3965_006v002
Page 4-35
Configuring Unit Parameters
To view and configure system information:
1. Select Platform > Management > Unit Parameters . The Unit Parameters page opens.
Table 41 describes the fields in the Unit Parameters page.
Figure 150 Unit Parameters Page
Table 41 Unit Parameters
Parameter Definition
Name A name for the unit (optional). This name appears at the top of every
Web EMS page.
Description Descriptive information about the unit. This information is used for
debugging, and should include information such as the chassis type.
System up time The time since the system was last reinitialized.
Contact person The name of the person to be contacted if and when a problem with the
system occurs (optional).
Location The actual physical location of the node or agent (optional).
Longitude The unit's longitude coordinates.