Cambium Networks PTP 820 Series, User Manual, Page: 123 / 1149

Chapter 2: Getting Started Configuring Unit Redundancy for the PTP 820G
phn-3965_006v002
Page 2-28
Figure 29 Standby Tab of Unit Redundancy Page
Viewing Link and Protection Status and Activity
You can view link and protection status and activity any time.
To view link and protection status and activity:
Select Platform > Management > Unit Redundancy . The Unit Redundancy page opens ( Figure 32 ).
The following information is displayed:
•
Protection Operational State – Indicates whether unit redundancy is functional. Radio protection is not
functional if the management connection to the mate is down.
•
Protection Activity – The activity state of the device: Active or Standby.
•
Protection Link to Mate – Indicates whether the two units (the Active and the Standby) are physically
connected.
•
Copy to mate status – Indicates the status of the last copy-to-mate operation
•
Protection Admin – Indicates whether unit redundancy is enabled or disabled.
•
Lockout – Indicates whether lockout is enabled or disabled.
Switchover
The following events trigger switchover for unit redundancy according to their priority, with the highest priority
triggers listed first.
1. Loss of active unit
2. Force switch