Page 1
About this guide
This guide describes how to install the PTP 650 LPU and Grounding Kit (Cambium part number
C000065L007). This kit contains two lightning protection units (LPUs) and LPU ground cables.
One kit is used for each of the PSU and AUX copper Cat5e Ethernet interfaces to the ODU. Users
of this guide will require expertise in outdoor radio equipment installation.
Note
This guide assumes that the LPUs are being installed on a PSU drop cable. To understand how
procedures differ when installing an AUX drop cable, refer to the
PTP 650 Series User Guide
.
Note
PTP 650 LPUs are not suitable for installation on SFP copper Cat5e Ethernet interfaces. For SFP
drop cables, obtain suitable surge protectors from a specialist supplier.
Related documents
For full PTP 650 installation instructions, refer to the
PTP 650 Series User Guide
.
Version information
Document number and version: phn-3348_002v000.
Date of publication: July 2013.
Waste Electrical and Electronic Equipment (WEEE)
For instructions on waste disposal of used products, refer to
http://www.cambiumnetworks.com/support
