Chapter 6: Configuration and alignment
Using the installation wizard (Master Mode)
Page 6-7
Attribute
Meaning
WPA2 Pre-shared
Key
Configure this key on the Master, then configure the Slave with this key
to complete the authentication configuration. This key must be between
8 to 128 symbols.
Installation wizard step 2 – Radio parameters
Attribute
Meaning
Radio
Country Defines the country code being used by the device. The country code of
the BHS follows the country code of the associated Master, unless it is
an FCC SKU in which case the country code is US. Country code defines
the regulatory rules in use for the device.
Downlink/Uplink
Ratio
The schedule of downlink traffic to uplink traffic on the radio link. The
three options, 75/25, 50/50 and 30/70, allow the radio to operate in a
fixed ratio on every frame. In other words, this ratio represents the
amount of the total radio link’s aggregate throughput that will be used
for downlink resources, and the amount of the total radio link’s
aggregate throughput that will be used for uplink resources.
Max Range This parameter represents cell coverage radius. Slaves outside the
configured radius will not be able to connect. It is recommended to
configure Max Range to match the actual physical distance of the
farthest subscriber.
Channel Bonding Disabled: The device uses one radio for data transmission.
Enabled: The device uses two radios for data transmissions.
