Cambium Networks PMP 450 AP, Planning And Installation Manual

Page: 83 / 287

Chapter 2: System hardware ODU interfaces
Page
2-33
Port
name Connector Interface Description
SFP 2 SFP Ethernet SFP module (single or dual)
Ground
Lugs 10 AWG copper wire For grounding the unit
PMP/PTP 450i
The Ethernet and Sync/AUX ports are on the rear of the integrated and connectorized ODUs ( Figure
23 ). These interfaces are described in Table 39 .
Figure 23 PMP/PTP 450i Series - ODU rear interfaces
Table 39 PMP/PTP 450i Series – ODU rear interfaces
Port name Connector Interface Description
Main PSU RJ45 PoE input Power over Ethernet (PoE).
10/100/1000BASE-T
Ethernet Data
Sync/AUX RJ45 10/100/1000BASE-T
Ethernet Data (see Note below)
PoE output Standard IEEE802.3at PoE.
LED
Aux
Main
Ground Lug
Ground Lug
RF port B RF port A