Chapter 5: Installation
Installing an integrated ODU
Page
53
Installing an integrated ODU
Caution
Do not reverse the bracket clamp, as this arrangement may lead to failure of the
assembly. Do not over-tighten the bolts as this may lead to failure of the assembly.
PMP 450m Series – 5 GHz AP
To mount and connect an integrated ODU, proceed as follows:
1
Inventory the parts to ensure that you have them all before you begin. The full set of parts is
shown in
Figure 121 PMP 450m Series - 5 GHz AP unbox view
Note
The additional nuts provided for top and bottom brackets are used to hold the long
bolts in position during installation.
PMP 450m AP
Bottom bracket
Top bracket
(Additional
nuts)
(Additional
nuts)
