Chapter 5: Installation
Mount the ODU, LPU and surge suppressor
Page
14
Refer to the
Gigabit Ethernet Surge Suppressor Installation Guide
for more details.
Figure 77 Gigabit Ethernet Surge Suppressor
PMP/PTP 450 Series
The PMP/PTP 450 Series uses 600SSH Surge Suppressor. The inside of the surge suppressor is shown in
Figure 78 600SSH Surge Suppressor – inside
Key to Callouts 600SSH
1
Holes—for mounting the Surge Suppressor
to a flat surface (such as an outside wall).
The distance between centers is 4.25 inches
(108 mm).
Caution
The PMP 450 SM 900 MHz is based off of the 450 Series, be sure to use a 600SS to protect
this radio type.