Cambium Networks PMP 450 AP, Configuration Manual

Page: 622 / 649

Chapter 5: Troubleshooting General troubleshooting procedure
Page
5-2
General troubleshooting procedure
General planning for troubleshooting
Effective troubleshooting depends in part on measures that you take before you experience trouble in
your network. Cambium recommends the following measures for each site:
• Identify troubleshooting tools that are available at your site (such as a protocol analyzer).
• Identify commands and other sources that can capture baseline data for the site. These may include:
o
Ping
o
Tracert or traceroute
o
Link Capacity Test results
o
Throughput data
o
Configuration tab captures
o
Status tab captures
o
Session logs
o
Web browser used
• Start a log for the site.
• Include the following information in the log:
o
Operating procedures
o
Site-specific configuration records
o
Network topology
o
Software releases, boot versions and FPGA firmware versions
o
Types of hardware deployed
o
Site-specific troubleshooting processes
o
Escalation procedures
• Capture baseline data into the log from the sources listed above