Cambium Networks PMP 450 AP, Configuration Manual

Page: 515 / 649

Chapter 4: Reference information Equipment specifications
Page
4-23
Specifications for PTP 450i Series - BH
The PTP 450i BH conforms to the specifications listed in Table 160 .
Table 160 PTP 450i Series - BH specifications
Category Specification
Model Number PTP 450i BH
Spectrum
Channel Spacing 5, 7, 10, 15, 20, 30, and 40 MHz Channel Bandwidth
Configurable on 2.5 MHz increments
Frequency Range 4900 - 5925 MHz
Channel Bandwidth 4900 – 5925
MHz 5, 10, 15, 20, 30, and 40 MHz
Interface
MAC (Media Access
Control) Layer Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 10/100/1000BaseT, half/full duplex, rate auto negotiated
(802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v2c and v3
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @ 5
MHz Channel 3.5 GHz 1x = -92.7 dBm, 2x = -88.7 dBm, 4x = -82.7 dBm, 6x = -
75.8 dBm, 8x = -69 dBm
3.6 GHz 1x = -92.7 dBm, 2x = -87.3 dBm, 4x = -81 dBm, 6x = -74.9
dBm, 8x = -68.3 dBm
4.9 GHz 1x = -93 dBm, 2x = -88.3 dBm, 4x = -82 dBm, 6x = -74.4
dBm, 8x = -67.9 dBm
5.1 GHz 1x = -93 dBm, 2x = -88.7 dBm, 4x = -81.2 dBm, 6x = -74.7
dBm, 8x = -67.6 dBm
5.2 GHz 1x = -93 dBm, 2x = -89 dBm, 4x = -81.5 dBm, 6x = -75
dBm, 8x = -67.5 dBm