Cambium Networks PMP 450 AP, Configuration Manual

Page: 498 / 649

Chapter 4: Reference information Equipment specifications
Page
4-6
Specifications for 3 GHz PMP 450m Series - AP
The 3GHz PMP 450m AP conforms to the specifications listed in Table 157.
Table 157 3GHz PMP 450m Series - AP specifications
Category Specification
Model Number 3GHz PMP 450m AP
Spectrum
Channel Spacing Customizable channel selection to 50KHz raster
Frequency Range 3300 – 3900 MHz
Channel Bandwidth 5, 7, 10, 15, 20, 30 and 40MHz
Interface
MAC (Media Access
Control) Layer Cambium Networks Proprietary
Physical Layer 8x8 Multi-User MIMO OFDM
Ethernet Interface 100/1000BaseT, full duplex, rate auto negotiated (802.3
compliant), dual SFP support for 1 Gbps optical
Protocols Used IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP,
SNMPv2c and v3, Cambium Networks cnMaestroTM
VLAN 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @ 5
MHz Channel 3.5 GHz 1x=-97.3 dBm, 2x=-95.1 dBm, 4x=-88.7 dBm, 6x=-82.6
dBm, 8x=-74.9 dBm
3.6 GHz 1x=-96.6 dBm, 2x=-94.4 dBm, 4x=-88.0 dBm, 6x=-82.0
dBm, 8x=-74.2 dBm
Nominal Receive
Sensitivity (w/ FEC) @
10 MHz Channel 3.5 GHz 1x=-94.9 dBm, 2x=-92.9 dBm, 4x=-86.4 dBm, 6x=-80.3
dBm, 8x=-73.2 dBm
3.6 GHz 1x=-94.3 dBm, 2x=-92.2 dBm, 4x=-85.8 dBm, 6x=-79.6
dBm, 8x=-72.3 dBm
3.5 GHz 1x=-93.1 dBm, 2x=-91.1 dBm, 4x=-84.6 dBm, 6x=-78.3 dBm,
8x=-71.9 dBm