Cambium Networks PMP 450 AP, Configuration Manual

Page: 494 / 649

Chapter 4: Reference information Equipment specifications
Page
4-2
Equipment specifications
This section contains specifications of the AP, SM, BHM and BHS associated supplies required for 450
Platform Family installations.
Specifications for 5 GHz PMP 450m Series - AP
The 5 GHz PMP 450m AP conforms to the specifications listed in Table 156 .
Table 156 5 GHz PMP 450m Series - AP specifications
Category Specification
Model Number PMP 450m AP
Spectrum
Channel Spacing Configurable on 2.5 MHz increments
Frequency Range 5150 to 5925 MHz
Channel Bandwidth 5, 10, 15, 20, 30, and 40 MHz
Interface
MAC (Media Access
Control) Layer Cambium Proprietary
Physical Layer 14x14 Multi-User MIMO OFDM
Ethernet Interface 100/1000BaseT, half/full duplex, rate auto negotiated
(802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v3
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @ 5
MHz Channel 5.1 GHz 1x=-101.6 dBm, 2x=-96.2 dBm, 4x=-90.2 dBm, 6x=-84 dBm,
8x=-76.6 dBm
5.2 GHz
1x=-101.3 dBm, 2x=-96.3 dBm, 4x=-89.7 dBm, 6x=-83.3
dBm, 8x=-75.7 dBm
5.4 GHz 1x=-101.1 dBm, 2x=-96.8 dBm, 4x=-90 dBm, 6x=-83.9 dBm,
8x=-76.2 dBm