Cambium Networks PMP 450 AP, Configuration Manual

Page: 108 / 649

Chapter 1: Configuration General configuration
Page
1-80
General page - PMP 450i SM
The General page of PMP 450i SM is explained in Table 24 . The General page of PMP 450 SM looks the
same as PMP 450i SM.
Table 24 General page attributes – PMP 450i SM
Attribute Meaning
Link Speeds From the drop-down list of options, select the type of link speed for the
Ethernet connection. The default for this parameter is that all speeds are
selected. The recommended setting is a single speed selection for all APs
and SMs in the operator network.
802.3at Type 2 PoE
Status and
PoE Classification
When the PoE Classification functionality is enabled and if Type 2
power is not present, the Pas do not power up and draw too much
power.
By default, the PoE Classification feature is disabled, and the Pas will
power up regardless of the classification presented by the power
source.
This is supported only on 450i series ODUs.