January 2017 000v012
5
security options will be attempted upon network entry.
After upgrade ePMP Elevate subscribers are configured
with the default ePMP WPA2 Pre-shared Key of
Cam39-
Tai!wdmv
. If the ePMP access point has been configured
with a new, non-default WPA2 Pre-shared Key, this key
must be configured on all network subscribers to allow
network entry.
3
After configuring access point parameters, click Save then
click the Reboot button.
Migration Step 3: Install and power on
the ePMP access point on-site
For additional ePMP access point installation
requirements, see the
ePMP User Guide
, available
here:
Cambium Support website
.
Option 1 (Preferred): When possible, install the
ePMP access point onsite after pre-configuration.
This technique offers the best opportunity to
minimize the network outage time required upon
subscriber transition to the ePMP access point.
Option 2: Alternatively, the ePMP access point
may be installed as a direct replacement to the
currently operating access point using the same
mounting equipment (when possible). This
technique will require more subscriber downtime
than option 1.
Migration Step 4: Upgrade ePMP Elevate-compatible subscribers
Installing the ePMP Elevate software on supported subscriber modules allows registration of the subscriber
to the ePMP access point. This procedure may be completed remotely (over-the-air, does not require a site
visit) or locally (via direct wired Ethernet connection to each subscriber module, requires a site visit).
Caution!
The ePMP Elevate migration process does require a brief system outage during access
point transition. Once the ePMP Elevate software has been installed on a subscriber, it will no longer
register to its original access point, and network entry will only be available via the ePMP access point.
Please plan migration windows appropriately to minimize customer impact. Careful preparation and
device pre-configuration will reduce resultant system downtime.
SUBSCRIBER SOFTWARE UPGRADE TO EPMP ELEVATE
1
Download ePMP Elevate software (based on device type) from the
Cambium Support website
.
2
Using a web browser, navigate to the subscriber module’s configured management IP address.
3
Login to the subscriber module using your configured username and password.
