Hardware Overview
18
Note
For all valid partnumbers, refer
60 GHz cnWave™ User Guide.
60 GHz cnWave™ radios and mounting bracket option
Installing the cnWave radios
To install the radio, use the following procedure and guidelines:
1.
2.
Attach ground cables to the radio
3.
Mounting the ODU on the mast or wall
Typical installation
V1000
figure shows typical installation of cnWave CN on a mast and powered through
PoE Power Injector.
1. Use recommended grounding and Surge Suppressor connections.
2. Use recommended cables for interfacing ODU (refer powering options and cable length restrictions
section in
60 GHz cnWave™ User Guide).
3. Always install ODU 0.5 meters below the tip of the pole.