Cambium Networks cnPilot R200, User Manual

Page: 17 / 151

Chapter 2: Basic Settings Hardware Installation
Page
15
Chapter 2: Basic Settings
This chapter covers:
•
Web Management Interface
• Accessing and Configuring cnPilot Home Router via cnMaestro
•
Configuring via Voice Commands
Web Management Interface
cnPilot Home Routers feature a web browser-based interface that may be used to configure and
manage the device. See below for information.
Note
By default, http access is disabled. Only https is allowed.
Logging in from the LAN port
Ensure your PC is connected to the router’s LAN port correctly.
Note
You may either set up your PC to get an IP dynamically from the router or set up the
IP address of the PC to be the same subnet as the default IP address of router is
192.168.11.1. For detailed information, see
Chapter 4: Troubleshooting Guide.
EZ UI
cnPilot Home Routers provides an additional simplified management interface for home users. The
home users can connect to any of the LAN port of the device and access the EZ UI by entering
https://mywifi.net in the browser.
Home users needs to provide the default Basic User credentials as useradmin/admin.
Note
Please check with your ISP in case the Basic User credentials have been changed
for improved security.
Figure 3 EZ UI