background image

Step 3

 

(Wall Mount w/bracket)

Reset Procedure

RoHS Compliance

WEEE Statement

Powering

LEDs

Default Configuration

Join the conversation

community.cambiumnetworks.com

To reset cnPilot E500:

- Press the reset button. The cnPilot E500 will 

reboot.

- Hold the button for 10 seconds. The cnPilot 

E500 configuration will be reset to factory 

default settings.

Attach the cnPilot E500 to the mounting 

bracket.

To power cnPilot E500:

-  Connect the provided 56V/30W gigabit 

passive PoE power injector provided to the 

Eth1 port.

To power another device 

using cnPilot E500:

- Connect the device to the Eth2 port .

-  Configure cnPilot E500 to output power

 on the Eth2 port by using the webpage 

management interface.

System LED

 When amber the system is powering up, 

and when green the system is fully powered.

Network LED

When amber, the cnPilot E500 is not con-

nected to cnMaestro, and when green, 

cnPilot E500 is connected to cnMaestro.

Default IP address:

- Received via DHCP. 

- cnPilot E500 will use a default static IP 

address of 192.168.0.1 if there is no DHCP 

server.

Default login information:

 - Username: admin

 - Password: admin

Management protocols enabled by default:

 - HTTP, HTTPS (webpage management 

interface access), SSH (CLI management 

interface access).

cn

Maestro

Ready

cn

Maestro 

Ready

cnPilot E500 is cnMaestro ready

Cambium Networks is committed to meeting the 

requirements of the European Union (EU) Waste Electri-

cal and Electronic Equipment (WEEE) Directive. This 

Directive requires producers of electrical and electronic 

equipment to finance the takeback, for reuse or recy-

cling, of their products placed on the EU market after 

August 13, 2005. Cambium Networks products that are 

within the scope of the Directive are labelled with a 

crossed-out "wheelie-bin" symbol, as required by the 

Directive. It indicates that the product was placed on the 

market after August 13, 2005 and that end users should 

segregate the product from other waste at end-of- life.

The WEEE Directive is being implemented in each of the 

27 EU countries through national legislation. Norway 

and Switzerland have also implemented similar pieces of 

legislation. As a result, the detailed requirements vary 

considerably throughout the EU, and the Cambium 

Networks WEEE compliance approach varies among 

countries. In each country affected by the WEEE 

legislation.

Eth1                         Eth2

cambiumnetworks.com/support

System LED

 

Network LED

Reviews: