AP Management
Safety Notice
Configure Management PC
Specifications
Hardware Overview
Hardware Overview
Powering Up
The cnPilot e435W Access Point supports multiple modes of
management:
Standalone:
The Access Point can be managed directly from its GUI by
selecting the ‘Configure’ tab on the menu, and setting up a wireless LAN.
Controller :
The Access Point can be onboarded to cnMaestro network
controller system, either on-premises or the cloud version at
https://cloud.cambiumnetworks.com.
For management from cloud please ensure the AP has connectivity to
the internet. Connectivity can be verified using tools such as ping from
the ‘Troubleshooting’ tab of the Access Point GUI. Connection status can
be monitored from the AP dashboard.
1.
2.
3..
Select Properties for the Ethernet port. In Windows it is found in
Control Panel > Network and Internet > Network Connections >
Local Area Connection.
IP Address Configuration:
Default IP address is received via DHCP.
cnPilot e435W will use a default static IP address of 192.168.0.1, If
there is no DHCP server.
Default Login information
- Username: admin
Management Protocols enabled by default –http or https (webpage
management interface access), SSH (CLI management interface access).
1.
2.
3.
LED Color
Amber Green Blue
Status
Indicator
Access Point is
powering up and
Intitializing
Access Point is in
service.
Access Point is
managed with
cnMaestro or
autopilot.
Warning:
To prevent loss of life or physical injury, observe the following safety guidelines. In no
event shall Cambium Networks be liable for any injury or damage caused during the
installation of e435W platform. Ensure that only qualified personnel install.
Only use attachments/accessories specified by the manufacturer.
Electrical Safety Information
Do not substitute the power cord with one that is not the provided
approved type. Never use an adapter plug to connect to a 2-wire outlet
as this will defeat the continuity of the grounding wire.
The equipment requires the use of the ground wire as a part of the safety
certification, modification or misuse can provide a shock hazard that can
result in serious injury or death.
Contact a qualified electrician or the manufacturer if there are questions
about the installation prior to connecting the equipment.
Protective earthing is provided by Listed AC adapter. Building installation
shall provide appropriate short-circuit backup protection.
Protective bonding must be installed in accordance with local national
wiring rules and regulations.
1.
2.
3.
4.
a.
b.
c.
d.
e.
Compliance with manufacturer’s label for voltage, frequency, and current
requirements. Connecting to a different power source than those specified may
result in improper operation, damage to equipment or pose a fire hazard if the
limitations are not followed.
There are no serviceable parts inside this equipment. Service should be
provided only by a qualified service technician.
This equipment is provided with a detachable power cord which has an integral
safety ground wire intended for connection to a grounded safety outlet.
Be aware that the unit surfaces can become very hot to the touch so do not
handle the device when it is running for long periods of time. Turn off power
to the device first for a few minutes and then handle the unit carefully.
FCC Compliance
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device is restricted for indoor use.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
FCC Compliance
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11
peuvent être exploités. Sélection d'autres canaux n'est pas possible.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement
pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
For indoor use only.
Pour une utilisation en intérieur uniquement.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This radio transmitter has been approved by FCC to operate with the antenna types
listed below with the maximum permissible gain and required antenna impedance for
each antenna type indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.
Antenna Information: Five single-band antenna, Gain 2.98/4.05dBi
RoHS/WEEE Compliance
Online Resources
User Guide and software downloads:
https://support.cambiumnetworks.com/files/e435W/
Support:
http://www.cambiumnetworks.com/support/
Contact us:
http://www.cambiumnetworks.com/support/contact-support/
Caring for the Environment: RoHS/WEEE
European Directive 2002/96/EC requires that the equipment bearing this symbol on
the product and/or its packaging must not be disposed of with unsorted municipal
waste. The symbol indicates that this product should be disposed of separately from
regular household waste streams. It is your responsibility to dispose of this and
other electric and electronic equipment via designated collection facilities
appointed by the government or local authorities. Correct disposal and recycling will
help prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old equipment,
please contact your local authorities, waste disposal service, or the shop where you
purchased the product.
CE Marking
CE marking on this product represents the product is in compliance with all
directives that are applicable to it.
With 802.3af/at
PSE
With 802.3af/at
PSE switch
With Injector
LAN / Computer
To AC
outlet
To AC
outlet
LAN / Computer
With 48V Power
adapter
48V Power adapter
Cambium 30W
injector
Kensington
Lock Slot
Reset
Button
Eth1/
PoE IN
PASS
THRU
PASS THRU
48V/ 1A
ETH2
ETH3
ETH4/
PoE OUT
Reset
- To restart, press and hold Reset.
To restore to factory default settings, press and hold Reset for more than
10 seconds.
Eth1/
PoE IN
- Gigabit Ethernet port used to connect the power. It should be connected
to the LAN and DHCP server.
Eth2/
Eth3
- Spare gigabit Ethernet ports for connecting additional network devices.
Pass
Thru
- Are electrically connected internally so that in-wall wired non-Ethernet
connectivity to a device in the room can be connected easily through
e435W port on the back to the corresponding pass thru port on the
bottom edge of the AP. If desired, the Eth1/PoE IN port can be jumpered
with a short Ethernet cable and the Pass Thru port on the bottom edge
can be used as the main LAN/PoE IN port.
Ethh4/
PoE OUT
- Provides DC power to a secondary device and is
802.3af compliant. It detects the device power and connectivity
needs dynamically. This port can also be used as a standard
Gigabit networking data only port.
DC
Power
- e435W can be powered with a 48V/1A power adapter as an
alternate to PoE. The power jack is located on the bottom edge of
the device next to the Eth4/PoE OUT LAN port.
Kensington
Lock Slot
- The slot on the side of e435W that can be used to secure the unit
to deter theft with a Kensington Lock device.
