cnMaestro c4000 Controller Quick Start Guide
CAMBIUM NETWORKS
11 |
P a g e
Initial Setup and Software Upgrade
Power ON the cnMaestro c4000 Controller. POWER LED will glow after powering ON and wait for 2
minutes to boot up the device properly.
•
The controller comes with a default factory image.
•
To upgrade the controller with latest software image, setup the management port connectivity
as shown below:
Figure 3: Installing cnMaestro c4000 Controller
Login to Web UI
•
Open the browser and login to controller UI as http(s)://<IP address> with default credentials as
below:
o
Username: admin
o
Password: admin
Note
cnMaestro c4000 Controller will try to get a DHCP IP. In case of DHCP failure the
default fallback IP is 192.168.0.1.