113
7.2.
Factory Data Reset
If you want to reset your WebStation to original setting, you can use this
functionto do factory data reset. Go to Settings
SD card & device storage
Factory
data rese, and touch “Reset device”.
Then WebStation will reboot and reset to
factory data. Please note that this feature will clean all the data and applications in
your WebStation.
After you reset factory data, please reboot your WebStation. Then the system
will ask you to calibrate the touch screen, please follow below steps:
1.
Use stylus pen to touch the cross icon
2.
There are five cross icons as left top, right top, right down, left down and
middle.
3.
Be sure to touch five cross icons and then the system will enter the
launcher screen.
4.
Now your WebStation is already reset factory data.
If you didn’t calibrate the touch screen, WebStation may not act precisely on
screen touch. If you want to calibrate the touch screen, you have to reset factory data
again for do this procedure. If touch screen cannot function normally, please
connect an USB keyboard to the WebStation, and then click menu key (or F1 button
on keyboard). It'll pop up a window, using the arrow buttons and the Enter button on
the keyboard to access Settings -> SD card&device storage at setting. Choose factory
data reset. It will restore your WebStation back to factory settings.
Please keep in mind that by doing this step, it will clear all apk files which you
installed before. After restoring the WebStation, it will start the touch calibration
process.
Summary of Contents for WebStation
Page 1: ...Rkjh Manual July 14 2010 Version 2 3 Version 2 3 Date of Last Revision July 14 2010...
Page 62: ...57...
Page 86: ...81...