ADC 2
Instruction Manual, November 2016
Page 3
•
Some interior parts of the instrument are under AC power.
Careless and improper use can cause injury. Unauthorized ma-
nipulations can cause damage
•
This sign indicates (on instrument and in this manual) that fail-
ure to take note of the accompanying information may result
in damage of the instrument
•
The instrument is manufactured and tested in accordance with
the respective European safety publications shown on the Dec-
laration of Conformity (DoC). The instrument complies with
safety class 1 and has been designed for indoor use only (IP
20). Further, this device has passed the CAMAG Quality Assur-
ance tests and has been delivered in safe operation condition.
For detailed instrument data see chapter technical data
•
Attention: For safety reasons the instrument may only be used
for the purposes described in the operating manual
•
To avoid injury use adequate safety equipment (protective
goggles, gloves etc. if applicable) when working with the in-
strument
•
Before first operation, check whether the voltage shown on the
instrument matches your local mains voltage. The power cord
may only be connected to a grounded, fused (not higher than
16A) outlet. Do not use extension cords without ground con-
tact
•
When working with the fluids of the instrument, be sure to
take the appropriate caution (protect your eyes from direct
contact with liquid)
•
Risk of finger squeeze between moving parts; be careful clos-
ing the door
•
The instrument may be used only by properly trained laboratory
staff
•
The instrument may not be used in rooms with danger of ex-
plosions
•
The instrument contains highly sophisticated electronics and
optical parts. It may be operated only in a non-condensing at-
mosphere in the temperature range outlined in the chapter
"Technical Data". Before installation and use, the instrument
should be acclimated properly
•
Use a damp lint free cloth for cleaning the instrument surface.
Do not employ aggressive detergents
•
Protect yourself and the instrument from electrostatic shock
which can cause damage to the electronic parts
Summary of Contents for ADC 2
Page 1: ...INSTRUCTION MANUAL ADC 2 ...
Page 41: ......
