Calypso WEATHERDOT, User Manual

Page: 7 / 11

Calibration
The Weatherdot has been calibrated with accuracy, following the same calibration
standards for each unit.
4. How to Use
1. Charge your Weatherdot before use.
A. Place the unit on the base of the wireless charger upside down as shown in the
photo.
B. The base with the tripod screw and the lanyard should be facing up.
C. The Weatherdot will be fully charged within 1-2 hours depending on the level of
battery before charge.
2. Install the Anemotracker App
A. Make sure your device has an active Bluetooth connection. The Weatherdot works
with Android 4.3 and beyond or iOS devices (4s, iPad 2 or beyond).
B. Download and install the Anemotracker App from Google Play or the Apple Store.
C. Once the App is installed start it and open the settings menu by sliding the screen
to the right.
D. Press the“ Pair Weatherdot” button and all Weatherdot devices within range will
show up at screen.
E. Select your device and connect. Your device is the one that corresponds with the
MAC number on your Weatherdot box
3. Spin the Weatherdot in a circle for 80 seconds.
A. To obtain Temperature, Pressure and Humidity, spin the Weatherdot by its lanyard
around in a full circle during 80 seconds making sure to keep a firm grip on the
lanyard at all times.
5
Weatherdot
User manual