ULTRASONIC ULP
ULTRASONIC ULP
3.3. Power
· 3,3-18V
3.6 Easy mount
-
3 x M4 lateral female thread
-
3 x M4 inferior female thread
Mounting accessories
3. Technical specifications
(continuation)
ULP 485 has to be connected as is shown below:
Lateral and inferior female thread. It can be mounted either on a plate (inferior screws) or on a tube
(lateral screws).
North mark position
Make sure the north mark is perfectly aligned
RS485 Output:
Image 5. Cable connections.
UART/TTL Output:
M4x0,5
M4x0,5
Pole mount up to 52 mm
The ULP has been designed to avoid any
mechanical parts to maximize reliability and
minimize maintenance.
The transducers communicate between themsel -
ves two by two using ultrasonic range waves. Each
couple of transductors calculates the signal delay
and gets information about both, wind direction
and wind speed.
Wind speed
Range: 0- 45 m/s
Accuracy: ±0.1 m/s at 10m/s
Wind direction
Range: 0- 360°
Accuracy: ± 1°
Flat mount
Adapter to Poles up to 39mm
DATA Tx
DATA Rx
Ultrasonic transducers (4x)
3.5. Wind
·
Windspeed
·
Wind direction
Data interface
1-Stream output
2-POLL output
3- MODBUS
Data format
NMEA0183
Baudrate
2400 to 115200 bauds
Voltage range
3,3-18V
