doing that, the LED light of Bluetooth adapter will flash red and blue alternately slowly, indicating
the Bluetooth adapter and Bluetooth remote controller are pairing with each other.
⑤
When the light of both Bluetooth remote controller and Bluetooth adapter flash blue slowly ,
pairing is finished.
Note: The pairing will be remembered after the first pair, so when you second or next time
use the device, Just power on and press the PTT button to reconnect the Adapter /dongle.
Pairing with Bluetooth headset or speaker mic
①
Place the AH300 remote controller and the Bluetooth
headset or mic in a visible area within 1 meter range.
②
Make sure the Bluetooth remote controller is in power
off state.
③
In USB charging power off state press and hold
PTT
Button
for about 8 seconds or in power on idle state
press and hold
PTT Button
for 16 seconds, when the Blue
LED and the Red LED flashing alternately, release the button
then the AH300 remote controller is in pairing state.
④
Long press the Power on/off Button of Bluetooth helmet headset or speaker mic for about 8s,
release the button when the LED indicator becomes flash red and blue alternately, at this
moment, Bluetooth headset or mic is in pairing state;
When both indicators of the headset or mic and remote control shift to flash blue slowly,
indicating pairing successfully.
⑤
Adapter paired successfully, the Power on/off button of the remote control act as a
multi-functional button, now you can control calls and music by remote control.
Note: The pairing will be remembered after the first pair, so when you second or next time
use the device, do not need to pair again. Just power on and press the PTT button to
re-establish the link.
Pairing with mobile phone
①
Place the AH300 remote controller and the mobile phone
