AFX SERIES® OPERATION MANUAL
SECTION 5: UNPACKING AND INSTALLATION
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS)
• All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 56 of 402
The requisite WYE load output wiring is shown in Figure 5-6 using internal voltage sense and
Figure 5-7 when using external voltage sense.
L2 (B)
L3 (C)
L1 (A)
N
NOTE: THREE NEUTRAL
OUTPUT CONNECTOR PINS
(N N N) ARE INTERNALLY
SHORTED TOGETHER.
USE EITHER ONE OR ALL
FOR THREE PHASE WYE
LOADS.
USE PROVIDED MATING CONNECTOR
TO CONNECT LOAD WIRES
Figure 5-6: Three phase Wye Load Output Connections
–
Internal Voltage Sense
