AFX SERIES® OPERATION MANUAL
SECTION 4: TECHNICAL SPECIFICATIONS
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS)
• All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 41 of 402
4.15
Transformer Output Voltage Range (T Option)
If more than 332Vac L-N is required in three-phase mode, the 400V Transformer option may
be added to an AFX power source. This option provides an additional 400Vac L-N AC only
voltage range. The standard 300Vac L-N voltage range as well as the DC mode and AC+DC
modes remain available as the output transformer for this option are bypassed when not in
use.
Figure 4-13: Rack Mount Chassis for 6kVA to 15kVA Transformer Option
4.15.1
Available T Option Rating Versions
The Transformer option is available in several power levels to match the AFX source
configuration. The following transformer option ratings are available. Note that AFX models
used with a Transformer option are designated by an “AFXT” series designation.
AFXT Models
Transformer Rating
360AFXT-2A/-4A
Rack Mount 19” Chassis, 4U (7”) height.
Rated for 15kVA max. ,0 -400Vac
LN
/ 0 – 692Vac
LL
390AFXT-2A/-4A
3120AFXT-2A/-4A
3150AFXT-2A/-4A
3180AFXT-2A/-4A
Transformers are installed in 19” Cabinet Systems along with AFX power sources
Rated to 30kVA max ,0 -400Vac
LN
/ 0 – 692Vac
LL
3240AFXT-2A/-4A
3300AFXT-2A/-4A
3450AFXT-2A/-4A
Transformers are installed in 19” Cabinet Systems along with AFX power sources
Rated to 45kVA max, 0 -400Vac
LN
/ 0 – 692Vac
LL
3600AFXT-2A/-4A
Transformers are installed in 19” Cabinet Systems along with AFX power sources
Rated to 60kVA max, 0 -400Vac
LN
/ 0 – 692Vac
LL
For higher power configurations, contact factory
