Calspas Platinum Plus, Owner'S Manual

Page: 35 / 60

2018 Platinum Series Spas
LTR20181010, Rev. H
W
ater Clarity
www.calspas.com
33
Each time you refill the spa Follow the section “Filling and Powering Up Your Portable Spa” on
page 7 .
Prior to each use Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
If your water source is high in calcium, add stain and scale preventer.
Once a month Deep clean your spa’s filter. (Follow filter cleaning instruction at
beginning of this section)
Every two to four months Change the spa water. How often you change the water depends
on how much you use the spa. When you change the water, you
will need to:
• Clean and polish the acrylic surface (see page 38)
• Clean and treat the spa cover and pillows (see page 38)
•
Deep clean the filter (see page 30)
• Refill your spa (see page 7 )
Once a year Replace filter cartridges if the pleats appear frayed.
Troubleshooting Water Clarity Problems
Problem Probable Causes Possible Solutions
Cloudy Water • Dirty filter
• Excessive oils / organic
matter
• Improper sanitization
• Suspended particles /
organic matter
• Overused or old water
• Clean filter
• Shock spa with sanitizer
• Add sanitizer
• Adjust pH and/or alkalinity to recommended
range
• Run jet pump and clean filter
• Drain and refill the spa
Maintenance Schedule