®
RAIN BUCKET SETUP
making
since 1986
water work
6.
Press the
SET USE OF RAIN BY
Menu key.
The USE OF RAIN BY PROGRAM screen is
displayed (Figure 4).
PROG A . . . . . . . . . . . . . . . . . . . . YES
PROG C . . . . . . . . . . . . . . . . . . . . YES
PROG D . . . . . . . . . . . . . . . . . . . . YES
PROG E . . . . . . . . . . . . . . . . . . . . YES
DRIP 1 . . . . . . . . . . . . . . . . . . . . YES
DRIP 2 . . . . . . . . . . . . . . . . . . . . YES
Allow RAIN on the following:
PROG B . . . . . . . . . . . . . . . . . . . . YES
Rain causes negative hold-over to build
USE OF RAIN BY PROGRAM
which acts to cancel irrigation.
Figure 4
Here you will have the option of enabling or
disabling the use of negative hold-over (rain) for any
of the controller’s seven programs. If you select
YES, Negative hold-over will be used for that
program to reduce irrigation run times. If you select
NO, rain will have no effect on irrigation run times for
that program. If there is no rain bucket installed and
you are not sharing rain data through the Calsense
Command Center program, these settings will have
no effect on irrigation.
7.
Press the
PLUS
or
MINUS
keys
to change the setting.
8.
Press the blue
ARROW
keys to
move the cursor to the next entry.
9.
Press the
MAIN MENU
key.
The MAIN MENU screen is displayed (Figure 5).
Setup Status
Flow Radio Remote
Weather Reports
CALSENSE WATER MANAGEMENT SYSTEM
Programs & Stations Lights
Figure 5
RAIN BUCKET SETUP ( WITHOUT
RAIN BUCKET INSTALLED )
Note:
This would be used by Command Central
software users, or controllers in a chain.
From the MAIN MENU screen.
1.
Press the
WEATHER
Menu key
(Figure 6).
Setup Status
Flow Radio Remote
Weather Reports
CALSENSE WATER MANAGEMENT SYSTEM
Programs & Stations Lights
Figure 6
The WEATHER SETUP screen is displayed
(Figure 7).
WEATHER SETUP
ET Gage ET
Rain Bucket Budget
Rain Switch
Wind Gage Moisture
Figure 7
2.
Press the
RAIN BUCKET
Menu
key.
The RAIN BUCKET SETUP screen is displayed
(Figure 8).
