Calrec BRIO 36, User Manual

Page: 48 / 210

48 BRIO 36
Audio Production System with Optional Networking
SETTING UP
Reset to First Source
It may sometimes be necessary to reset Brio’s synchronisation. To start the synchronisation reset process tap
RESET TO 1ST SOURCE . Brio will attempt to synchronise to each source in priority order, starting at priority one.
Once a viable synchronisation source is found the process will stop and the new sync source will display the ‘locked to’
tab as shown here.
It is important that the required sync source is available before the console boots up otherwise it won’t be locked to the
correct sync, if this occurs press the ‘Reset to first’ button after the sync generator is running.
FIGURE 2 -
RESET TO FIRST SOURCE