www.calorique.com
2 |
P a g e
Mode 01 - Air temperature only setting
The 3M Remote Floor Sensor is assumed to be disconnected for this mode of operation.
The small number (menu setting) is set to 07 and the parameter setting is 00,
is displayed.
With the Calorique Bel100 Thermostat turned off, press
for 3 seconds.
Press the
button until the small number (menu setting) in the top left hand corner is set to 09.
Use the Up/Down arrow key to change the large number (parameter setting) to 01 (default = 01).
Press
to accept and proceed to menu setting 07.
Use the Up/Down arrow key to change the large number (parameter setting) to 01.
Press
to store and exit.
Mode 00 - Floor temperature only setting
With the Bel 100 turned off, press
for 3 seconds.
Press the
button until the small number (menu setting) in the top left hand corner is set to 09.
Use the Up/Down arrow key to change the large number (parameter setting) to 00.
Press
to accept and proceed to the next menu.
Press
to store and exit.
Setting the Clock:
To set the clock, follow the steps below.
With the thermostat turned on, press
twice.
You are now able to set the minutes using the Up/Down keys.
Press H to accept.
You are now able to set the hours using the Up/Down keys.
Press H to accept.
You are now able to set the day of the week using the Up/Down keys.
Press F to store and exit.
Temporary Temperature Adjustment
Using the Up/Down arrow keys you can adjust the current set temperature.
On the screen, you will see SET and the new temperature display.
This temperature will be maintained until the next comfort event.
Press F to accept and exit.
RT
= Current room temperature.
FT
= Floor Sensor temperature.
SET
= Set temperature, displayed when you are adjusting the temperature setting.
Programmed Operation:
Setting the Comfort Events
The thermostat has 4 comfort events for the weekday and 4 for the weekend.
This method of control is not to have on/off times but to allow the occupant to set varying temperatures
throughout the day.
For example:
5:00 - 21°C (Wake) 8:00 - 10°C (Go to work) 18:00 - 21°C (Return home)
20:00 - 10°C (Sleep)
If you only want to use 2 events, you should program the unused events to -.-.
You are now able to program the first comfort event for the weekday using the following steps:
To begin programming the comfort event, press
once. You will see “MO – FR” displayed.
Use the Up/Down arrow keys to select the time for the 1st comfort event for the weekday.
Press H to accept.
Enter the required temperature for the 1
st
comfort event.
Repeat for comfort events 2-4.
You will now see “Sa Su” on screen. Repeat for the comfort events for the weekend.
Press F to store and exit.
Other Features
To Display the Floor Temperature (Air & Floor and Floor only)
If under mode 01, press F key for 3 seconds to display the floor temperature.
If under mode 00, only the floor temperature is displayed.
Floor Temperature Exceeded (Air & Floor )
Provided the floor temperature limit feature has been enabled (menu setting No. 07 is 01),
