Replacing The Light Bulb:
Burn
Hazard!
Light bulb become extremely hot when turned on. DO NOT touch bulb until
switched off and cooled. Touching hot bulbs could cause serious burns.
Maintenance (Continued)
•
Check the range hood tag for lamp specifications. Halogen bulbs will not work on "LED"
models (they will lightly pulse or flash).
•
Before performing any task outside of basic operation, turn off the power supply and/or
unplug the unit.
•
Before attempting to handle the light bulbs, ensure the bulbs are cool to the touch,
including any adjacent working surfaces
.
Replacing LED Light Fixture:
•
This range hood uses LED light fixture: 3W Max 12V LED.
•
Make sure the range hood is unplugged or turn OFF breaker and the lights are cool to
touch.
•
Place a flat-head screwdriver between light housing and hood body, gently pry up the light
housing and search for the metal clip. (Recommended: use multiple layers of tape over the
screwdriver head to prevent any scratching of the finish)
•
Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and
discard the old light fixture.
•
Reverse the steps to install a new halogen light fixture. Turn ON breaker and range hood to
test for operation.
Pg 19
