24
Replacing Oven Light
WARNING
!
To avoid risk of burns or electrical shock, disconnect
electrical supply to oven before changing light bulb.
• Wear protective gloves.
• Before replacing light bulb make sure bulb is cool.
• Do not operate oven without bulb in place.
1.
Disconnect electrical supply.
2.
Remove oven door if desired.
3.
Turn light bulb counterclockwise to remove.
4.
Replace with 120-volt, 40-watt appliance bulb.
• Do not overtighten bulb or it may be difficult to
remove later.
5.
Replace oven door before use.
6.
Reconnect power supply.
Replacing Oven Light
Place Grates and Burner Caps
A
B
C
A—Burner grate
B—Burner cap
C—Burner base
Place Grates and Burner Caps
To make sure cap is properly aligned and leveled, move
burner cap around on burner base. Pegs in the burner
base fit into recess in underside of burner cap. Burner
cap must be correctly seated on burner base for proper
operation of burner.
Make sure proper cap size is on each burner base.
Burner does not burn properly if wrong size burner cap is
placed on burner base.
Turn on burners to check for proper operation. See
Operating Surface Burners section for burner operating
instructions.
Correct
Not centered
Too small
Too large
Burner Caps
Care and Cleaning
(cont’d)
Summary of Contents for CSG3601
Page 27: ...27...
