6
Freezer Features
Frost Free System
Freezer and refrigerator sections are completely
frost free. Evaporator coil stops frost before
frost starts. Defrosting is automatic.
Refrigerator and freezer will never have to be
defrosted under normal operating conditions.
Ice Service Rack
(some models)
Ice service rack holds two ice cube trays and an
ice bin. Rack can be moved to right side by
completing the following steps.
1.
Slide rack toward front of freezer until
screws are in middle of mounting holes.
2.
Pull rack away from ceiling of freezer.
3.
Remove screws from ceiling using 1/4"
hex nut driver.
4.
Gently pry plastic plugs from opposite
side of ceiling using a flat blade
screwdriver covered with tape.
5.
Replace plastic plugs with screws and
vice versa.
6.
Line up middle mounting holes in side of
rack with screws on ceiling.
7.
Slide rack back until secure.
Automatic Ice Maker
(optional)
Refrigerator has an electrical connection in
freezer for installation of an ice maker. A water
filter can also be added to ensure good ice
cubes. Ice maker, model IC6A, and water
filter, part #R0183114, can be purchased
separately from an authorized Caloric dealer.
Freezer Shelf
1.
Remove shelf by pulling shelf forward.
A sharp tug may be necessary.
2.
Reinstall shelf by sliding shelf until back
snaps in.
Rack
(some models)
Rack separates food for better organized
storage space.
1.
Remove rack by sliding rack to release
round knobs from shelf wires. Pull down
if located under shelf or lift up if located
above shelf.
2.
Reinstall rack by positioning rack on top
or underneath center wire of shelf wires.
Lock into place by sliding rack until
round knobs are securely in place.
Door Buckets
Refer to Door Bucket instructions in Refrigerator
Features section.
Trim Kits
Add custom door panels to door fronts to
accent kitchen decor. Decorator trim kits hold
these panels in place. These kits can be
purchased from an authorized Caloric dealer.
Custom panels can be purchased locally.
