Page 3
Unit Description
AIR DISCHARGE FAN
WARNING: ROTATING BLADE KEEP
HANDS & HAIR CLEAR!
THERMOSTAT
CONTROLS
POOL/SPA
LED READOUT
WATER OUT
PIPE
REFRIGERANT
SERVICE VALVES
DO NOT OPEN !
WATER IN
PIPE
SERIAL
NUMBER
PLATE
“OPTIONAL”
TIME CLOCK
OVERRIDE
SWITCH
ELECTRICAL
SUPPLY WIRING
ACCESS PANEL
“KEEP OUT”
ELECTRICAL
INSTALLATION
PORTS
POOL/SPA
SELECT SWITCH
DANGER FROM ELECTRICAL
SHOCK & ROTATING FAN !
SHUT OFF ALL POWER
BEFORE SERVICING !
CAUTION: MORE THAN ONE
DISCONNECTION MAY BE
REQUIRED TO ELIMINATE ALL
POWER TO THIS UNIT INCLUDING
POWER TO THE OPTIONAL TIME
CLOCK OVERRIDE !
WARNING
A swimming pool & spa pump utilizes proven refrigerant technology to capture the heat in the
outside air and transfers it to the pool water. Refrigerant is used because of its ability to absorb and
transfer heat energy. The
fan
circulates air through the outer
evaporator air coil
that acts as a heat
collector. The liquid refrigerant in the air coil absorbs the
available heat in the ambient air, transforming it into a
gas. The refrigerant gas is then
pumped into the
compressor
.
When this warmed gas is com-
pressed, it intensifies or concen-
trates the heat, like a magnifying
glass in the sun.
This intensely hot gas is then
pumped into the
heat ex-
changer condenser
, where the
actual heat transfer takes place.
As the pool water passes
through the heat exchanger, the
hot gas gives up its heat to the cooler pool wa-
ter. The refrigerant returns to a liquid state and
is pumped through the
expansion valve
then
into the evaporator air coil to start the process all
over again.
How Does A Heat Pump Warm My Pool ?
How Efficient Is It ?
This graph is a operational cost comparison for equal
amounts of pool heat. As you can see heat pump is
the most efficient way to heat your pool.
Compared to L.P. gas heaters, a heat pump produces
5 to 6 times more heat for every $1.00 you spend
on operation.
FAN
WARM
AIR
COOL
AIR
COMPRESSOR
POOL
WATER
PUMP
FILTER
HEAT EXCHANGER
CONDENSER
EXPANSION
VALVE
EVAPORATOR
AIR COIL
WARMED
GAS
OFF/ON
SWITCH
