RECEIVING A CALL
When a call comes, the telephone rings, and LCD displays the date, time and the incoming
number.
Note:
For the phone to display incoming number and other information, you must have an
active Caller ID subscription with your local telephone exchange company.
Auto Mode
In auto call mode, the call is answered automatically without ringing but blue backlight.
Move Mode
Press [ON/OFF] to answer when it rings.
Note:
Generally telecom transmits the incoming message between the first ring and the
second ring. Please answer the phone after the second ring.
MAKING CALL
1.
Press [ON/OFF] key.
2.
When you hear the dial tone, dial the desired number.
3.
The unit will start to time the conversation after 6 seconds.
4.
When finished, press [ON/OFF] key again.
REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS
Reviewing
In on-hook state, press UP or DOWN key to scroll and review the numbers.
Redial
1.
At on-hook state
2.
Press OUT key to review the number which is going to be redialed
3.
Press Redial key; the LCD will display the outgoing number and call is dialed out.
Deleting
When the desired number is shown, press
DEL
key, the number is deleted.
Press and hold
DEL
key for 3 seconds; all the incoming numbers are deleted.
NOTE:
If the PABX code is set, the telephone will detect and add the code before the number
automatically when dialing back the number. It will dial the PABX code first and then after a 2
second pause and then dial the number.
KEY FUNCTION
OUT
This key will display all the numbers called.
BACK
At on-hook state, review the incoming or outgoing call list and find the number; press
