4
CONNECTING THE IAG800 V2
The NX-S/O 2/4/8 is designed for easy configuration and easy installation. To connect the NX-S/O 2/4/8,
please follow the steps above:
1. Plug a standard RJ11 telephone cable into the phone port and connect the other end of the telephone
cable to a standard touch-tone analog telephone.
2. Plug the Ethernet cable into the LAN port of the NX-S/O 2/4/8 and connect the other end of the Eth-
ernet cable to an uplink port (a router or a modem, etc.)
3. Plug the power adapter into the NX-S/O 2/4/8 and connect it to a wall outlet.
4. When the phone adapter is ready for use, the Power, Ethernet, and phone LEDs will be solidly lit.
CONFIGURING THE NX-S/O 2/4/8
The NX-S/O 2/4/8 can be configured either through the PC’s Web browser using the embedded Web GUI or
using the IVR voice prompt menu.
OBTAINING THE IP ADDRESS
The NX-S/O 2/4/8 is configured with DHCP by default. To know the IP address of the NX-S/O 2/4/8, you can
refer to the following steps to obtain an IP address.
1. Using an analog phone, connect to any of the phone ports.
2. Press ** (press the star key 2 times) will announce the current IP address. The default is to broadcast
the IP in English.
CONFIGURE BY WEB GUI
Via LAN1 Port
If your NX-S/O 2/4/8 is connected through LAN1 port, please refer to the following steps.
1. Power your NX-S/O 2/4/8 with the correct size AC/DC.
2. Open a web browser on your computer.
3. Enter the IP address of the NX-S/O 2/4/8 into the address bar of your browser.
4. Enter the administrator password to access the Web Configuration Menu. (By default, the adminis-
trator user name and password are admin).
