Call Aid UK Ltd
50 Cornhill Road, Carlton, Nottingham, NG4 1GE
Tel: 0115 940 0905 [email protected] www.callaiduk.com Fax: 0115 853 1969
PAM 1142RX Coding Instructions
Adding an additional PAM unit
Before proceeding, please ensure that all PAM units are turned off and no other
PAM units are active within radio range of the receiver. If any PAMs are active
near the receiver, this will interfere with the operation.
1.
With the radio receiver powered on and in standby mode (NO PAMS ARMED),
press the ‘UP’ and ‘DOWN’ buttons together briefly until the ‘MENU/ ADD NEW
DEVICE’ shows on the display.
2.
Press the ‘ARMED CHECK’ button on the receiver. The ‘SELECT DEVICE ID’ menu
should be now showing on the display.
(The device ID menu is used to choose which number will show on the display
when the PAM unit is in operation. This number can be any number from 1-50.
)
3.
Please use the ‘UP’ and ‘DOWN’ buttons on the receiver to select the desired ID
number for the PAM unit.
(The ‘UP’ button will increase the ID by one until fifty, while the ‘DOWN’ button will
decrease the ID by one until it reaches one.)
