2
3
Initial setting
Please note that the vehicle must be
connected to a mains power supply.
1. Press the relay contact’s teach-in
button.
2. The relay contact LED starts to flash
slowly.
3. Press the “on” button on the
remote control, which will then
transmit its code.
4. The relay contact receives the
code and the LED flashes twice to
confirm.
5. The relay contact LED stops flas-
hing.
6. The remote control and relay
contact are now “connected”.
Resetting
Repeat the steps indicated for “Initial
setting”.
Daily use, on/off function.
Press the “I” button to switch on the
system and the “0” button to switch
it off.
Keyring transmitter
for on/off control.
Range
The remote control has a range of up
to approximately 30 m.
Setting the code changeover switch
Open the case at
the back. Select a
code by turning
the selector using
a small screwdri-
ver.
Battery replacement
1. Open the case
with a small
screwdriver.
2. Remove the old
battery and push
a new one in.
Check the polarity
before closing the
case.
Specifications
Frequency: 433.92 MHz
Battery: One 3 V CR2032 lithium bat-
tery (included).
