20
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
November 2022.
Tabletop Mounting the u4g
Any Calix GigaSpire BLAST u4g can be mounted flat on a tabletop. Four (4) rubberized feet
are pre-installed on the bottom of the unit to provide a non-skid surface when placing the
unit on a table or shelf.
Keep the following information in mind when considering tabletop mounting:
Due to component placement inside the chassis and under the u4g, do not remove the
rubber feet that are installed on the bottom of the unit. Locate the device on the desktop
in a location that is unlikely to be bumped or jostled.
Make sure that the Ethernet cable[s] (if used), POTS line, fiber pigtail, and power supply
wiring attached to the GigaSpire are secured properly and out of harms way.
Note:
Once the unit is connected and turned up, Wi-Fi network parameters are persisted
in memory. For this reason, if power is lost to the device, it will be re-discovered on the
network automatically, without operator intervention.
