5- CONNECTING THE MANUAL DIMMER CONTROL
The dimmer control is connected to the dimmer wire from the driver. This enables light intensity (PPF output) to be
adjusted according to requirement.
The Grizzly LED fixture light intensity can be adjusted without changing spectral power distribution or losing
efficiency.
6- CONNECTING FIXTURES IN SERIES FOR EXTERNAL CONTROL
For detailed instructions please refer to the Calitek Control Panel manual.
Position and hang each fixture appropriately.
a) Connect the signal wire to the fixture 1, RJ14 port (in).
b)
Connect RJ14 (out) of fixture 1 to RJ14
(in)
of fixture 2.
c) Continue to connect fixtures in series for up to 100 fixtures per controller.
7- CONNECTING THE LED FIXTURE TO THE MAINS
Make sure mains power is switched off.
Ensure the power supply cable is not coiled and does not touch any hot surfaces.
Connect the cables according to local rules, safety regulations and electrical code.
Ensure external switching gear can cope with the inrush current of the Grizzly fixture. Always use a double
pole contactor suitable for switching a capacitive load.
Do not connect or disconnect the Calitek fixture under load.
HORTICULTURAL LIGHTING SYSTEM. NOT SUITABLE FOR THE ILLUMINATION OF HOUSEHOLD ROOMS.
EN
Summary of Contents for Grizzly 600
Page 1: ...FR EN...
Page 16: ......
