6
2. COMMISSIONING
Fig. 1
Fig. 2
Fig. 3
2.1. USE
Before commissioning, make sure that the
device is completely assembled and free of
damage.
A. Place device at a suitable location.
B. Connect power cable to device
(Fig. 1)
.
C. Connect power plug to a grounded socket.
D.
Switch on device (Fig. 2).
E.
Select air flow via adjustment wheel
(Fig. 3)
.
Use the power switch to turn off the
device completely when not in use,
otherwise the UVC fluorescent tubes will
continue to glow, reducing their life.
NOTE
The air performance of the device
depends, among other things, on the
degree of saturation of the filters and
can therefore decrease over time. It is
therefore essential that you observe the
necessary maintenance intervals.
Summary of Contents for C300
Page 12: ...Science for healthy air...
