Appendix A: Software Reference 136
P/N 113564 Rev. 2
Twister II Robot User’s Manual
Caliper Life Sciences, Inc.
Settings Window
Use the Settings window (see
) to specify the simulation
setting and the Comm port. To open the Settings window, select
File
→
Settings
on the Robot software main window.
The settings option opens the Settings window.
Figure 109. Settings Window
Simulation Mode
- If On, communication with the robot is
simulated and the robot does not move. If Off, enables
communication with the robot using the specified Comm port.
Comm Port
- The number of the Comm port that the robot is
connected to on the computer.
Option Description
Apply
Applies the specified settings and closes the
Settings window. To save the settings in the INI
file, select File
→
Save on the Robot software main
window.
Cancel
Closes the Settings window without changing the
settings.
