7
Installation
Step 3: Installing the Bracket and Chain
Weld (recommended) both brackets directly on the end of both sides of the gate.
Side View
Top View
Chain Position
The chain should have no more than 1 inch (2.5 cm) of sag for every 10 feet (3m) of chain length.
Chain should not be too tight or too loose. Chain should be straight and not bent at an angle. If the
chain is too loose, remove links from the chain until you get your desired length.
Figure 7
Figure 8
NOTE
: Make sure the chain is straight and not bent. Incorrect installation can cause the gate operator to
malfunction and potentially get damaged. Figure 8.
