![background image](http://html1.mh-extra.com/html/calimet/cm3-acfp/cm3-acfp_instructions-manual_3055111014.webp)
13
Use of External Receiver
Figure 17
External connectors are installed on the rear side of mainboard protector box.
Slave Operator Activation
Figure 18
1.
Set SLAVE switch on SLAVE CONTROL BOARD to ON position.
2.
Use UL proved electric wire connect DATA- and DATA- from Master control
board to Slave control Board, then connect DATA+ and DATA+ accordingly.
3.
M/LINK light turns to solid bright.