Technical Data
Sanding Pad………………………………………………………………………..5” (125 mm)/6"(150 mm)
Free speed…………………………………………………………………………10,000 rpm
Air consumption…...……………………………………………………………….2.8 cfm (79.2 l/min)
Operating pressure
………………………………………………………………..90 psi (6.3 bar)
Air inlet size
…………………………………………………………………………1/4”
Air hose
size………………………………………………………………………..3/8”
Weig
ht………………………………………………………………………………2.30Lbs (1.05kgs)
A-Weighted sound pres
sure level………………………………………………..89.0 dB (A)
Sound power level…………………………………………………………………100.0 dB (A)
Vibration in the handle…………………………………………………………… 18.30m/s
2
Important Safety Rules
1. Always wear safety goggles or glasses.
2. Always ensure machine is switched off before connecting to air supply.
3. Disconnect any machine from the air supply before changing blades or discs, and before servicing any
type of machine.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion
and possible failure.
5. Do not wear watches, rings bracelets or loose clothing when using air tools.
6. Using only light weight coil hoses from a tool to the wall or compressor coupling.
Do not fit quick change couplings onto the machine as vibration can cause the coupling to fail.
7. Do not overload the machine. Allow the tool to operate at its optimum speed for maximum efficiency.
8. Do not increase the air pressure above the manufacturers recommended level of 8 bar, as excessive
overload can cause the machine casing to split. Also this creates excessive wear on moving parts and
possible failure.
9. In the interests of safety and possible damage to the machine/operator, always ensure that the
machine has stopped before putting it down after use.
10. Always ensure that the work piece is firmly secured leaving both hands free to control the machine.
11. Always ensure that the accessories such as blades, discs, sockets, etc. are rated/designed for use
with the machine.
Also correctly and securely fastened before connecting the machine to the air supply.
12. When grinding, sanding or cutting always wear an appropriate face mask or respiratory equipment.
Operating Instruction
Description
The California Air Tools PRO 1005 Composite Orbital Sander is designed with the professional in mind.
The lightweight (2.3 lbs) composite body and rear exhaust reduces fatigue during a job. Operating at
10,000 RPM and using 2.8 CFM 90 PSI make sanding very easy. Includes a 5” pad.
