INSTRUCTIONAL MANUAL
2750L-P/4500L-P/6000L-P
August, 2001
Rev. K
-31-
normally closed relay contacts are held open by the power controller under normal running conditions. The contacts
are allowed to close after a fault or if power is lost to the power source. The connector is installed as an option.
Figure 3-3
FUNCTION STROBE CONNECTIONS
3.5 FRONT
PANEL
PROGRAMMING
3.5.1 KEYPAD
The front panel keypad is enabled whenever the REMOTE light is not lit. The AC Power System may be manually
programmed by using the keypad and observing the front panel LCD display.
Figure 3-4 shows the front panel keypad. Table 3-4 lists the key and a brief description. While viewing any Output
Parameter screen (Ref. Table 3-5), the screens may be viewed in increasing order by depressing the MON key and in
decreasing order by depressing the PRG key. While viewing the Measurement Screens, the MON and PRG keys work
in a similar fashion. For example, if the AMP parameter screen is displayed, the FRQ screen may be displayed by
pressing the MON key one time. The display will be switched back to the AMP screen by pressing the PRG key.
Figure 3-4
KEYPAD
Summary of Contents for 12000L-1P
Page 119: ...INSTRUCTIONAL MANUAL 2750L P 4500L P 6000L P August 2001 Rev K 115 Figure 6 1 MODULE LOCATION...
Page 138: ...INSTRUCTIONAL MANUAL 2750L P 4500L P 6000L P August 2001 Rev K 134 Figure 14 EMERGENCY VOLTAGE...
Page 148: ...INSTRUCTIONAL MANUAL 2750L P 4500L P 6000L P August 2001 Rev K 144 FIGURE 2...
